Board index » Talking About Stuff » N00b Talk
|
Page 1 of 1
|
[ 7 posts ] |
|
Print view
Previous topic | Next topic
| Author |
Message |
MUDFROG
Joined: Sun Oct 04, 2020 9:27 pm Posts: 26
Vehicle: Suzuki sierra SJ413
|
 Posted: Wed Nov 04, 2020 9:15 pm |
|
|
looking at getting some breathers for the diffs and transfer case, should I do the gearbox while I'm at it? is there a complete kit you can buy? including the hoses, fittings.(complete kit) I know you have to re-tap them with a 1/8th size to run the fittings i think etc.. SJ80 coily 1997 cheers all
|
|
|
|
 |
4x4xzook
Joined: Wed May 16, 2012 8:41 am Posts: 730 Location: Melbourne
Vehicle: MG410 Gypsy
|
 Posted: Thu Nov 05, 2020 9:24 am |
|
|
|
 |
MUDFROG
Joined: Sun Oct 04, 2020 9:27 pm Posts: 26
Vehicle: Suzuki sierra SJ413
|
 Posted: Thu Nov 05, 2020 6:59 pm |
|
|
Cheers mate, so that link covers everything needed aye, just tap the holes and off I go
|
|
|
|
 |
4x4xzook
Joined: Wed May 16, 2012 8:41 am Posts: 730 Location: Melbourne
Vehicle: MG410 Gypsy
|
 Posted: Fri Nov 06, 2020 7:08 am |
|
Yes the kit includes everything to run the breathers.  Always remember to check your oils before any big trip. I forgot to one trip and chewed out my rear diff when some yummy mud found its way inside. (Didn't have breathers)
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 12997 Location: Melbourne
|
 Posted: Fri Nov 06, 2020 8:37 am |
|
|
I don’t understand how that kit is supposed to work. The threads on the fittings that are visible are parallel, not tapered thread, and IF they’re suitable for tapping into the diff breathers they definitely aren’t suitable for tapping into the transfer or gearbox. I can’t see any adapter or anything else to work with the gearbox or transfer. It looks to me like a generic kit that makes the hassle of fitting it your problem.
|
|
|
|
 |
bumstein

az supporter
Joined: Sat Oct 06, 2012 5:49 pm Posts: 1975
Vehicle: Sierras!! SWB and LWB
|
 Posted: Sat Nov 07, 2020 9:36 am |
|
|
The diff end fittings all look tapered to me. Not the filter end but that end has no need for it. It even has the smaller thread for the diff breathers!
I’ve used the same fittings (not from eBay kit though) and they work perfectly. Good kit I reckon
|
|
|
|
 |
MUDFROG
Joined: Sun Oct 04, 2020 9:27 pm Posts: 26
Vehicle: Suzuki sierra SJ413
|
 Posted: Sun Nov 08, 2020 11:31 am |
|
|
|
 |
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online
Users browsing this forum: Google [Bot] and 6 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
Untitled Document
Untitled Document
|