| auszookers.com https://www.auszookers.com/forum/ |
|
| GV bullbar fitment and indicators https://www.auszookers.com/forum/viewtopic.php?f=37&t=54983 |
Page 1 of 1 |
| Author: | 30ONA [ Mon Jan 29, 2018 5:55 pm ] |
| Post subject: | GV bullbar fitment and indicators |
I picked up a cheap alloy bull bar today. I have some questions as I've never fitted one. 1. Can someone confirm the lights are indicators. I presume these are needed because the bar partially obscures the original ones. 2. What's the neatest and easiest way to hook them up? 3. What is a good product to clean it up with? |
|
| Author: | Chop [ Mon Jan 29, 2018 8:25 pm ] |
| Post subject: | Re: GV bullbar fitment and indicators |
Is that air bag compatible? |
|
| Author: | 30ONA [ Mon Jan 29, 2018 9:44 pm ] |
| Post subject: | Re: GV bullbar fitment and indicators |
How can you tell? |
|
| Author: | ZUZUKI [ Tue Jan 30, 2018 12:46 am ] |
| Post subject: | Re: GV bullbar fitment and indicators |
It will have a sticker - often on the top face, but might be on the inside of one of the wings. This sticker will state that it is SRS / Air bag compatible with an ADR number & will also say "Don't remove this sticker" The TJM alloy bar I have was identified as such - until I removed the sticker!. That bar is not the same though. Rgs, Michael |
|
| Author: | cairns27 [ Tue Jan 30, 2018 4:27 am ] |
| Post subject: | Re: GV bullbar fitment and indicators |
Clean it with vinegar. bye |
|
| Author: | 30ONA [ Tue Jan 30, 2018 4:17 pm ] |
| Post subject: | Re: GV bullbar fitment and indicators |
No sticker. It's an AMA brand. Brisbane manufacturer. I've contacted them to find out. |
|
| Author: | 30ONA [ Mon Jun 04, 2018 6:56 pm ] |
| Post subject: | Re: GV bullbar fitment and indicators |
Can I fit a JB bull bar to an SQ vitara easily? |
|
| Author: | ZUZUKI [ Tue Jun 05, 2018 11:40 pm ] |
| Post subject: | Re: GV bullbar fitment and indicators |
Easy is a no - completely (and I mean COMPLETELY) different - JB / JT is too wide, side returns too long, chassis non-existant. Given enough time & money, it could probably be butchered to fit acceptably, but then it would no longer be an SRS compatible bullbar, as there are no modifications allowed - especially to the mounting arrangements. Current SRS compatible options are Uneek, with a 'bumper replacement' type bar & XROX with a 'comp' style tube ended + central hoop bar - both are winch compatible. TJM might still (??) do the bar I have (alloy, no winch) but not listed on their site Rgs, Michael |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|