| auszookers.com https://www.auszookers.com/forum/ |
|
| 2015 Jimny seat removal https://www.auszookers.com/forum/viewtopic.php?f=37&t=51067 |
Page 1 of 1 |
| Author: | WySiWyG [ Thu Sep 24, 2015 6:27 pm ] |
| Post subject: | 2015 Jimny seat removal |
Hi, I picked up my brand spanking new Jimny yesterday (so much happy!!) and today I started pulling out the back seats. I've got the back rests out but I can't figure out how to unclip the base section! Does anyone know of a thread or pics of a seat removal? The ones I've found are for older models and it doesn't appear to be similar. Thanks! |
|
| Author: | TasmanSam [ Thu Sep 24, 2015 8:14 pm ] |
| Post subject: | Re: 2015 Jimny seat removal |
Hey mate this article goes over the removal of the seats step by step: http://www.danbp.org/w/Installation_of_ ... zuki_Jimny If you are on the bit im thinking of, the bottom of the seat needs to be pulled up with a fair bit of force to unclip it from the pressure plate thing it clips in to. |
|
| Author: | Jezza86 [ Thu Sep 24, 2015 8:16 pm ] |
| Post subject: | Re: 2015 Jimny seat removal |
Use the force. More of it atleast |
|
| Author: | WySiWyG [ Thu Sep 24, 2015 8:56 pm ] |
| Post subject: | Re: 2015 Jimny seat removal |
Thanks TasmanSam! The top half is already gone so I'll look for the base clips. Haha, Jezza86, the force is weak in this one.. Cheers, N. |
|
| Author: | irodders [ Sat Sep 26, 2015 9:35 am ] |
| Post subject: | Re: 2015 Jimny seat removal |
Yeah I pulled the seats out of a late model jimny and all it takes is a bit of force. You will get left with a locating bolt on either side of the car and I don't think you can get these out unless you want to grind them off. I left mine. I pushed/screwed a cork from a bottle of cheap bubbly on one of them and I'm waiting to get brave enough to buy another bottle to do the other one |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|