| auszookers.com https://www.auszookers.com/forum/ |
|
| Is grade 8.8 bolts right? https://www.auszookers.com/forum/viewtopic.php?f=37&t=44224 |
Page 1 of 1 |
| Author: | shipwrecked101 [ Sun Dec 08, 2013 11:04 am ] |
| Post subject: | Is grade 8.8 bolts right? |
I've just noticed the mount that goes from an engine mount to the gearbox is missing bolts and no longer attached to my gearbox, Just wondering if the champion grade 8.8 high tensile bolts will be right... Once again excuse the mechanical retardedness... |
|
| Author: | Gwagensteve [ Sun Dec 08, 2013 11:28 am ] |
| Post subject: | Re: Is grade 8.8 bolts right? |
They'll be fine. Steve |
|
| Author: | shipwrecked101 [ Sun Dec 08, 2013 11:31 am ] |
| Post subject: | Re: Is grade 8.8 bolts right? |
Awesome, thanks |
|
| Author: | Abraxix [ Mon Dec 09, 2013 7:01 am ] |
| Post subject: | Re: Is grade 8.8 bolts right? |
you're engine isn't attached to your gearbox?? - or your gear box isnt' attached to the car? that's pretty wild and a great saving find how'd you manage to find that out? |
|
| Author: | sbyard [ Sat Dec 14, 2013 2:28 pm ] |
| Post subject: | Re: Is grade 8.8 bolts right? |
Sorry for the hijack, but its a similar topic. I've sheared a kingpin bolt and am chasing the dimensions to order some more from this place: http://www.boltsnutsscrewsonline.com/ I'm working away at the moment otherwise I'd go grab one. Cheers, Sam |
|
| Author: | mnemonix [ Sat Dec 14, 2013 2:41 pm ] |
| Post subject: | Re: Is grade 8.8 bolts right? |
m8x1.25 x 25mm from memory. |
|
| Author: | shipwrecked101 [ Sun Dec 15, 2013 8:11 pm ] |
| Post subject: | Re: Is grade 8.8 bolts right? |
My gearbox wasn't attached to the car... Funny enough I had pulled off the front wheel to check out my tie rod ends when I noticed the mount hanging down... 3 out of the 4 bolts had fallen out!! Don't even know how I didn't see it earlier, I mean I had just finished a 300km drive pulling my trailer but it was all highway. Stocked I saw it as I wasn't even looking in the engine bay |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|