| auszookers.com https://www.auszookers.com/forum/ |
|
| Kingpin s https://www.auszookers.com/forum/viewtopic.php?f=37&t=36817 |
Page 1 of 1 |
| Author: | KEENSY85 [ Thu Nov 01, 2012 6:56 pm ] |
| Post subject: | Kingpin s |
Any tricks to installing king pins and shims? |
|
| Author: | SierraDan [ Thu Nov 01, 2012 7:24 pm ] |
| Post subject: | Re: Kingpin s |
12mm socket. Chisel/Screwdriver/Punch Hammer. |
|
| Author: | Bruce [ Thu Nov 01, 2012 8:03 pm ] |
| Post subject: | Re: Kingpin s |
Fish scales |
|
| Author: | KEENSY85 [ Thu Nov 01, 2012 8:35 pm ] |
| Post subject: | Re: Kingpin s |
Lol wt? I got them apart fine and will be able to put it all back together. but I noticed they were shimmed so I'm trying to work why they were shimmed or are they all shimmed? |
|
| Author: | Blkfxx [ Thu Nov 01, 2012 8:40 pm ] |
| Post subject: | Re: Kingpin s |
There needs to be a certain 'preload' on the bearings, The shims help set the correct setting. The fish scales will give you the reading. Have a read through the FSM, Very clear. |
|
| Author: | KEENSY85 [ Thu Nov 01, 2012 9:06 pm ] |
| Post subject: | Re: Kingpin s |
I should have done that first (read theFSM) { thanks guys) |
|
| Author: | cairns27 [ Fri Nov 16, 2012 7:14 am ] |
| Post subject: | Re: Kingpin s |
I,ve had fitter play with mine.No good. What's FSM ? Thanks. Bye |
|
| Author: | mrw82 [ Fri Nov 16, 2012 7:35 am ] |
| Post subject: | Re: Kingpin s |
cairns27 wrote: What's FSM ? Bye Fucking service manual Bye |
|
| Author: | shep [ Fri Nov 16, 2012 7:48 am ] |
| Post subject: | Re: Kingpin s |
cairns27 wrote: I,ve had fitter play with mine.No good. What's FSM ? Thanks. Bye There is your problem. Fitters replace components and mechanics rebuild components. If you are fixing bearings fitter style then ya need to buy a new assembled diff assembly and replace the lot. Mechanics can replace indervidual bearings. 
|
|
| Author: | BlueSuzy [ Sat Nov 17, 2012 9:25 am ] |
| Post subject: | Re: Kingpin s |
shep wrote: cairns27 wrote: I,ve had fitter play with mine.No good. What's FSM ? Thanks. Bye There is your problem. Fitters replace components and mechanics rebuild components. If you are fixing bearings fitter style then ya need to buy a new assembled diff assembly and replace the lot. Mechanics can replace indervidual bearings. You really need to define who you are talking about shep. A fitter is in maintenance and manufacturing, building and machining whatever is needed. A bullbar fitter is not. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|