[Jimny1]

Anybody had to replace number plate lite bulb on an 06 Jimny, without wrecking things whats the secret, cant turn the lens cant remove the lite fittings surley you do not have to remove the rear bumper to change bulbs Thanks in advance.

[BlueSuzy]

Should be 2 screws in the light housing?

[Jimny1]

No screws must twist or something cant get it to budge, the lense or the whole fitting must come out, lense are 3/4 golf ball size, 2 of one each side both globes blown. any other ideas.

[Jimny1]

ANYBODY that owns a jimny that could take a look at theirs and let me know please??????

[atari4x4]

if it's anything like the vitara the plug/globe holder unscrews 1/4 turn from the lense/backing plate which are glued together

[jimny_timmy]

Jimny1 wrote:

ANYBODY that owns a jimny that could take a look at theirs and let me know please??????

They twist off... Stop being a girly girl and twist it harder

Gimme a sec and i'll post some pics

[jimny_timmy]

Ok so heres proof they come off....



And here you should be able to see the notches that hold it in place



My left side comes out easier than the right due to dirt etc sticking to it, but it will come out

[Jimny1]

thanks for the heads up did not want to force in case it broke but will use more elbow grease.