| auszookers.com https://www.auszookers.com/forum/ |
|
| Welding rods https://www.auszookers.com/forum/viewtopic.php?f=14&t=5791 |
Page 1 of 1 |
| Author: | Damo [ Fri Jul 31, 2009 3:32 am ] |
| Post subject: | Welding rods |
I picked up some 2.5mm 9018 rods (Esab 9018-B3) the other day (they were cheap). Reading up about them they are made for cr-mo steels, but it doesn't say much about using them on normal mild steel. I'm thinking they should be OK. I'm going to have a crack with them, just wanted to hear what the welders amongst us have to say. |
|
| Author: | royce [ Fri Jul 31, 2009 11:45 am ] |
| Post subject: | Re: Welding rods |
A quick read then says the weld might cool differnt to teh base steel and might promote cracking FWIW we are currently importing a metric bucket load of pipe and fittings from Germany that would be perfect for these rods, cause lots of people had a crack at it and told lots of stories the customer may not have a use for it by the time it arrives, might be able to do you a deal 
|
|
| Author: | lump_a_charcoal [ Fri Jul 31, 2009 4:15 pm ] |
| Post subject: | Re: Welding rods |
royce wrote: A quick read then says the weld might cool differnt to teh base steel and might promote cracking
FWIW we are currently importing a metric bucket load of pipe and fittings from Germany that would be perfect for these rods, cause lots of people had a crack at it and told lots of stories the customer may not have a use for it by the time it arrives, might be able to do you a deal What? |
|
| Author: | Damo [ Sat Aug 01, 2009 11:13 am ] |
| Post subject: | Re: Welding rods |
royce wrote: A quick read then says the weld might cool differnt to teh base steel and might promote cracking
FWIW we are currently importing a metric bucket load of pipe and fittings from Germany that would be perfect for these rods, cause lots of people had a crack at it and told lots of stories the customer may not have a use for it by the time it arrives, might be able to do you a deal Cool, let me know. You know how much I like cheap stuff 
|
|
| Author: | Hybrid [ Mon Aug 03, 2009 9:15 pm ] |
| Post subject: | Re: Welding rods |
Damo wrote: royce wrote: A quick read then says the weld might cool differnt to teh base steel and might promote cracking FWIW we are currently importing a metric bucket load of pipe and fittings from Germany that would be perfect for these rods, cause lots of people had a crack at it and told lots of stories the customer may not have a use for it by the time it arrives, might be able to do you a deal Cool, let me know. You know how much I like cheap stuff Depending how man metric bucket loads you get you can build me a front bar lol. |
|
| Author: | Damo [ Mon Aug 03, 2009 9:42 pm ] |
| Post subject: | Re: Welding rods |
Hybrid wrote: Damo wrote: royce wrote: A quick read then says the weld might cool differnt to teh base steel and might promote cracking FWIW we are currently importing a metric bucket load of pipe and fittings from Germany that would be perfect for these rods, cause lots of people had a crack at it and told lots of stories the customer may not have a use for it by the time it arrives, might be able to do you a deal Cool, let me know. You know how much I like cheap stuff Depending how man metric bucket loads you get you can build me a front bar lol. Bring your bender around! |
|
| Author: | 31zook [ Tue Aug 04, 2009 1:49 am ] |
| Post subject: | Re: Welding rods |
Damo wrote: Hybrid wrote: Damo wrote: royce wrote: A quick read then says the weld might cool differnt to teh base steel and might promote cracking FWIW we are currently importing a metric bucket load of pipe and fittings from Germany that would be perfect for these rods, cause lots of people had a crack at it and told lots of stories the customer may not have a use for it by the time it arrives, might be able to do you a deal Cool, let me know. You know how much I like cheap stuff Depending how man metric bucket loads you get you can build me a front bar lol. Bring your bender around! screw the bender just a milk crate 
|
|
| Author: | Brian 92vit [ Tue Feb 02, 2016 9:19 am ] |
| Post subject: | Re: Welding rods |
The welding rod code means "9018" "90" thousand pound tensile strength "1" stands for all positions "8" is the type of flux coating, they will be fine for mild steel run them on DCEP or DC+ for best results |
|
| Author: | jdk81 [ Tue Feb 02, 2016 9:22 am ] |
| Post subject: | Re: Welding rods |
epic grave dig |
|
| Author: | Pubic [ Wed Feb 03, 2016 11:53 am ] |
| Post subject: | Re: Welding rods |
I got excited thinking Damo was back.... You're a bastard Brian! |
|
| Author: | Brian 92vit [ Thu Apr 14, 2016 8:38 pm ] |
| Post subject: | Re: Welding rods |
why am I a bastard "Pubic" ?? |
|
| Author: | Jezza86 [ Sat Apr 16, 2016 7:47 am ] |
| Post subject: | Re: Welding rods |
because it took you 6 years 9 months 25 days 7 hours and 30 minutes to post a reply. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|