| auszookers.com https://www.auszookers.com/forum/ |
|
| roof racks for soft top https://www.auszookers.com/forum/viewtopic.php?f=14&t=50749 |
Page 1 of 1 |
| Author: | kdalton [ Fri Aug 07, 2015 3:56 pm ] |
| Post subject: | roof racks for soft top |
has anyone got any pics or plans for a roof rack for sierra sj413 soft top .so I can carry my surfboard or kayak.thanks |
|
| Author: | kdalton [ Fri Aug 07, 2015 8:26 pm ] |
| Post subject: | Re: roof racks for soft top |
ye didn't think so |
|
| Author: | Blkfxx [ Fri Aug 07, 2015 9:47 pm ] |
| Post subject: | Re: roof racks for soft top |
Search and you shall find Fatzook wrote: Not quite the same as an exocage, but here is a roof rack I completed last week. Its pretty strong, and would resist a light layover quite well. The design brief was to keep it light, and obviously it is primarily a roof rack. Total weight is around 20kg's.
    |
|
| Author: | sideways [ Sat Aug 08, 2015 1:19 am ] |
| Post subject: | Re: roof racks for soft top |
Mine. Pretty sure it was built by parkside towbars in the 1980s. 
|
|
| Author: | kdalton [ Sat Aug 08, 2015 3:45 pm ] |
| Post subject: | Re: roof racks for soft top |
cheers that's what I need. |
|
| Author: | kdalton [ Sun Aug 09, 2015 1:27 pm ] |
| Post subject: | Re: roof racks for soft top |
going to make some roof racks.i don't have a pipe bender so im going to use square tube.which should I use 25mmx3mm or 35 x 3mm square tube.the rack is just for a surfboard or kayak. thanks |
|
| Author: | alien [ Tue Aug 11, 2015 2:55 pm ] |
| Post subject: | Re: roof racks for soft top |
I think you should buy a bender... Square tube will look shocking, especially without bends. |
|
| Author: | kdalton [ Tue Aug 11, 2015 4:27 pm ] |
| Post subject: | Re: roof racks for soft top |
I was going to notch then bend and weld up with square tube.which bender do I need a hydraulic or hand bender for 25mm x 3mm pipe. thanks |
|
| Author: | kdalton [ Tue Aug 11, 2015 5:34 pm ] |
| Post subject: | Re: roof racks for soft top |
do you mean one of those 12 tonne hydraulic pipe benders of ebay. cheers |
|
| Author: | kdalton [ Thu Aug 13, 2015 6:26 pm ] |
| Post subject: | Re: roof racks for soft top |
ye I thought you meant one of those |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|