auszookers.com
https://www.auszookers.com/forum/

M13A to G13BA Jimny power steering pump bracket
https://www.auszookers.com/forum/viewtopic.php?f=14&t=50082		 Page 1 of 1
Author:  coily96 [ Mon May 11, 2015 10:10 pm ]
Post subject:  M13A to G13BA Jimny power steering pump bracket
I've been working on an adapter to fit a M13A Jimny power steering pump to a G13BA block.

Image

Image

Image

Image
Since the G13BB and Vitara pump are a direct fit, the M13A pump required some modification to fit the G13BA block.

If there is any interest, after the bracket is finished I can have a run of these laser cut.

There is a few modifications to the original M13A bracket due to the shape and size, as well as designing the mount so the pump can tilt and work as a tensioner for the belt.
Author:  dougies_tx5turbo [ Mon May 11, 2015 11:32 pm ]
Post subject:  Re: M13A to G13BA Jimny power steering pump bracket
Must of miss your want add i would swap m13a bracket for your g13bb one if you still interested in one i am in Strathpine
Author:  coily96 [ Wed May 13, 2015 7:55 pm ]
Post subject:  Re: M13A to G13BA Jimny power steering pump bracket
Hey, ive only got a M13A bracket. Never had a G13BB hence why ive made a bracket to use the M13A on a G series motor.
Author:  coily96 [ Sat May 16, 2015 11:44 pm ]
Post subject:  Re: M13A to G13BA Jimny power steering pump bracket
The pump is on, just need to sort out the top bracket so it tensions the belt.
Image

Image
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/