| auszookers.com https://www.auszookers.com/forum/ |
|
| Vitara rear tube bar for just $60! https://www.auszookers.com/forum/viewtopic.php?f=14&t=47497 |
Page 1 of 1 |
| Author: | Nick.storm [ Fri Aug 22, 2014 5:17 pm ] |
| Post subject: | Vitara rear tube bar for just $60! |
Started making a rear bar last weekend. Pretty happy with how its looking. I guess I should put some mudflaps on? I really dont like the look of them though. Also going to weld on some recovery points and a bit of black checkerplate on the top to cover up that gap and make a step..  
|
|
| Author: | Gwagensteve [ Sun Aug 24, 2014 6:14 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Considering that not having mudflaps would be the #1 reason cars get defected I'd be putting them on. Steve. |
|
| Author: | Mike57 [ Sun Aug 24, 2014 6:21 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
I am not that comfortable with recovery points that are welded on. |
|
| Author: | Nick.storm [ Mon Aug 25, 2014 4:39 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
yeh ive bought some mudflaps.. dont need to draw attention to the other parts of my car they could defect if they wanted. I was thinking of making kind of t shaped recovery points, so i could have the t section behind the bar and then the longer bit sticking though with a hole for a shackle. That way im not just relying on one weld. It kinda scares me too. |
|
| Author: | Nick.storm [ Fri Sep 19, 2014 8:23 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
I thought i might update this, the bar is all finished now, mudflaps (not heaps happy with where they sit yet) checker plate and number plate lights. Admittedly it cost a bit more then $60 now but the checker plate was free    
|
|
| Author: | Bosco15 [ Sun Sep 21, 2014 7:24 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Nice work, Nick. Looks tough. |
|
| Author: | Nick.storm [ Sun Sep 21, 2014 8:55 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Thanks mate, im super happy with it now |
|
| Author: | Bosco15 [ Sun Sep 21, 2014 9:10 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Nick.storm wrote: Thanks mate, im super happy with it now How did you bend your pipes? |
|
| Author: | Nick.storm [ Sun Sep 21, 2014 9:54 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Bosco15 wrote: Nick.storm wrote: Thanks mate, im super happy with it now How did you bend your pipes? Ive just got a cheep hydraulic press bender. Working on making a proper mandrel bender though which should give some better results |
|
| Author: | yareckonillgetupthat [ Sat Oct 11, 2014 7:10 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
nice work. i need one of these |
|
| Author: | mic.n.his.zook [ Mon Oct 13, 2014 5:29 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Hey mate would you consider making one for a lwd 97 vitara winch compatible |
|
| Author: | atari4x4 [ Mon Oct 13, 2014 5:59 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
you need a rear mounted winch, for what? 
|
|
| Author: | Nick.storm [ Mon Oct 13, 2014 8:38 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Hey, just got engaged so wont have time to make anything before the end of the yr. If one or two people are seriously interested i might consider it next yr... Dont really know how the winch idea would go though, i guess it would be strong enough, i attached it to the tow bar mounts but not sure if there would be enough room behind it for the winch.. might have to make the whole bar stick out more to fit it in |
|
| Author: | jimnynutter [ Wed Nov 26, 2014 9:22 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Recovery points are to be bolted on only. Never use shackles in snatch recovery |
|
| Author: | jonno_racing [ Fri Nov 28, 2014 8:13 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
atari4x4 wrote: you need a rear mounted winch, for what? Rear winches are the new "in thing" |
|
| Author: | Zook_Fan [ Fri Nov 28, 2014 8:19 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
jimnynutter wrote: Recovery points are to be bolted on only. Never use shackles in snatch recovery You're not serious right? Of course shackles can be used in a snatch recovery. |
|
| Author: | shakes [ Tue Dec 02, 2014 8:21 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Zook_Fan wrote: jimnynutter wrote: Recovery points are to be bolted on only. Never use shackles in snatch recovery You're not serious right? Of course shackles can be used in a snatch recovery. Ever seen one impaled in the back of someones head? I've been lucky and just seen it go through a door. |
|
| Author: | atari4x4 [ Tue Dec 02, 2014 8:26 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
how do you attach a snatch strap to something like a towbar with the ball removed, skyhooks? hell, even the rated billet machined receiver hitches that slide into a hayman reese towbar have shackles to attach the strap to the vehicle.
|
|
| Author: | greenzook89 [ Tue Dec 02, 2014 9:42 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Hell they use shackles in industry. As long as its rated it isnt a problem |
|
| Author: | atari4x4 [ Wed Dec 03, 2014 12:18 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
joining a strap with one definitely is. i'd be worried if you've got substandard recovery points or the hillbilly factor takes over & the recovery goes redneck. 
|
|
| Author: | Zook_Fan [ Wed Dec 03, 2014 7:38 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
shakes wrote: Zook_Fan wrote: jimnynutter wrote: Recovery points are to be bolted on only. Never use shackles in snatch recovery You're not serious right? Of course shackles can be used in a snatch recovery. Ever seen one impaled in the back of someones head? I've been lucky and just seen it go through a door. No but I also haven't used one that wasn't rated for the job it was doing. Unless you've got a hayman reese towbar that you use the pin through the eye of the strap or you've got a hook with a safety catch you need to use a shackle. |
|
| Author: | shakes [ Thu Dec 04, 2014 4:58 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
When the consequence is death, why wouldn't you spend the couple hundred to get recovery hooks fitted properly? Shackles are only rated to a straight line pull, and not for twisting either... How many recovery's end up involving both? |
|
| Author: | DarkHorse [ Sat Dec 06, 2014 2:12 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Bow shackles are good for off-axis loads... but only in one direction. In the cases where shackles have gone flying, how often is the shackle itself the point of failure (assuming an adequately rated bow shackle is used.) |
|
| Author: | Antzook [ Sat Jan 31, 2015 9:27 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Nice job on the bar I did notice the kinks from the press bender they really aren't much chop.next time try filling the tube with sand and tax some caps on it and it should bend better. And on the topping of welded recovery points 1 inch of good penetrated weld is capable of lifting a tonne so if it's welded fully it should withstand anything I have them on mine and have recovery many a snatch without fail or hint off. |
|
| Author: | Nick.storm [ Tue Feb 03, 2015 3:42 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Yeh ive gone one step further and have a laser cut kit for a proper mandrel bender waiting to be assembled. I just got to but the bullet and buy a $500 die for it but that should get me flawless results But ive pretty much made all the bar work i need on my zook already! hahammm i do still need to do the recovery points.. and i will have to weld something cause there is no where to bolt anything on with this custom bar |
|
| Author: | Brian 92vit [ Sat Oct 01, 2016 10:45 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
those mudflaps are in adequate can only be a maximum of 240 mm off the ground to the bottom of the mud flaps, awesome build tho |
|
| Author: | Zook#2 [ Sun Nov 09, 2025 10:08 pm ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
How did U mount the bar |
|
| Author: | Gwagensteve [ Mon Nov 10, 2025 9:42 am ] |
| Post subject: | Re: Vitara rear tube bar for just $60! |
Holy gravedig Batman! The OP hasn’t been on here for 10 years so I don’t imagine you’re going to get an answer. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|