auszookers.com • View topic - Interior light time!!

Board index » Talking About Stuff » I made it and fabrication

Interior light time!!

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

zookernator

Joined: Sun Mar 16, 2008 10:30 pm
Posts: 813
Location: Tasmania

Posted: Wed Feb 25, 2009 10:19 pm

Well got bored today.. decided to light up the cab a bit more!! Got this LED light and switch from the local auto elec place.. came to $25.. made up this alloy bracket, and put them in

I then ran a dual core wire along the support beam.. which also tucked it away out of sight.. i tapped into the existing interior light.. and got the earth off the support beam screw. Let there be LIGHT!!

_________________
F&R ARB air lockers, lux diffs, 4 link coil rear,

morpheus

az supporter

Joined: Mon Oct 06, 2008 10:30 pm
Posts: 689
Location: Adelaide

Posted: Wed Feb 25, 2009 11:29 pm

ah looks nice..... :-)

and bright.... do u like the colour the LED puts out.

_________________
Download Sets @ http://www.johnpaul.3leggedcat.net

zookernator

Joined: Sun Mar 16, 2008 10:30 pm
Posts: 813
Location: Tasmania

Posted: Thu Feb 26, 2009 1:33 am

thanks buddy!! Yeah.. its pretty happy colour. Would be nice if it was a tad brighter.. but i will be getting some new lights to do a similar thing in the back of it soon.. so not a huge concern!

_________________
F&R ARB air lockers, lux diffs, 4 link coil rear,

Zook_Fan

az supporter

Joined: Thu Mar 13, 2008 10:30 pm
Posts: 4530
Location: Toowoomba
Vehicle: Maruti and LJ80's

Posted: Thu Feb 26, 2009 3:41 am

i run the same set of sealed LED's for my number plate light! is it really that bright in the cab you can hardly see the light of mine in the day but it isnt too bad at night

jamienoble

Joined: Mon Jul 28, 2008 11:30 pm
Posts: 128
Location: perth

Posted: Thu Feb 26, 2009 4:50 am

thats awesome! i have put a big fluro in mine that seems to work rather well i will try to get some photos of it tomoz!

brendan

Joined: Sun Jul 27, 2008 11:30 pm
Posts: 1484
Location: Sydney

Posted: Thu Feb 26, 2009 10:10 pm

jamienoble wrote:

thats awesome! i have put a big fluro in mine that seems to work rather well i will try to get some photos of it tomoz!

yep i got a 12inch fluro in my zook. best thing ive done to it :lol:

_________________
navara on 33s. hopfully rear air locker soon

scottysj80

Joined: Mon Jan 12, 2009 10:30 pm
Posts: 677
Location: south west rocks, mi

Posted: Fri Feb 27, 2009 12:56 am

brendan wrote:

jamienoble wrote:

thats awesome! i have put a big fluro in mine that seems to work rather well i will try to get some photos of it tomoz!

yep i got a 12inch fluro in my zook. best thing ive done to it :lol:

x2 i put 1 up the top at the back of the car and one beside the drivers seat at the top, i also replaced the original light with a led globe and wired it up so if i open any door the light will come on not just the driver door, ill put some pis up of it when im home again.

yours looks good zookernator

cheers scott

_________________
black coily, 30 inch tyers, 2 inch suspention, 2 i

dank

Joined: Sat Apr 05, 2008 10:30 pm
Posts: 1157
Location: VIC
Vehicle: WR250F/Jeep XJ

Posted: Sat Mar 07, 2009 4:31 pm

x3 12 inch fluro zip tied to the B pillar crossmember in between the seat where the old light used to be. Best Mod ever for night runs....lights up the whole interior all for $6.95!

gell

Joined: Fri Aug 01, 2008 11:30 pm
Posts: 5
Location: perth

Posted: Wed Apr 01, 2009 6:48 pm

I like your interior light, my suzi is a hardtop so I went to JAYCAR and replaced the original interior lightbulb with a 6led globe. Works a treat and is much brighter than the standard fitting.

gell

Joined: Fri Aug 01, 2008 11:30 pm
Posts: 5
Location: perth

Posted: Wed Apr 01, 2009 6:49 pm

I like your interior light, my suzi is a hardtop so I went to JAYCAR and replaced the original interior lightbulb with a 6led globe. Works a treat and is much brighter than the standard fitting.

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » I made it and fabrication

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum