Had some time on my hands and metal laying around so i slapped up a home job bar. Came up alright . Better than the stock good for nothing sheeet!!
Lights are still to go in and afue more features
| auszookers.com https://www.auszookers.com/forum/ |
|
| Vitara bull bar https://www.auszookers.com/forum/viewtopic.php?f=14&t=20901 |
Page 1 of 1 |
| Author: | ealfa [ Mon Apr 11, 2011 9:14 am ] |
| Post subject: | Vitara bull bar |
Had some time on my hands and metal laying around so i slapped up a home job bar. Came up alright . Better than the stock good for nothing sheeet!! Lights are still to go in and afue more features
|
|
| Author: | 89_tintop [ Mon Apr 11, 2011 9:17 am ] |
| Post subject: | Re: Vitara bull bar |
pics??? |
|
| Author: | ealfa [ Mon Apr 11, 2011 9:18 am ] |
| Post subject: | Re: Vitara bull bar |
Before 
After 
|
|
| Author: | ealfa [ Mon Apr 11, 2011 9:21 am ] |
| Post subject: | Re: Vitara bull bar |
Kinda just blends into the car havnt taken a great pic but ya get the jist! Any suggestions are welcome |
|
| Author: | SierraDan [ Mon Apr 11, 2011 11:43 am ] |
| Post subject: | Re: Vitara bull bar |
So is it a bit of tube across the front and a skid plate? |
|
| Author: | ealfa [ Mon Apr 11, 2011 11:56 am ] |
| Post subject: | Re: Vitara bull bar |
Tube with bend up top Straight tube down bottom then plate all the way down to control arms . Prity simple |
|
| Author: | SierraDan [ Mon Apr 11, 2011 12:10 pm ] |
| Post subject: | Re: Vitara bull bar |
I though that's what I could see. Looks good mate. Pretty much what I'm looking at doing but with two tubes up the top cos I've gotta put indicators on mine. |
|
| Author: | ealfa [ Mon Apr 11, 2011 12:19 pm ] |
| Post subject: | Re: Vitara bull bar |
Yeh I'm adding that as well but it will be square so I can easily mount lights etc and it also will strengthen top bar. I welded on thicker plates where the bull bar mounts on chasis and tapped it so I could use 2 x 14mm diam bolts for extra strength on each side 
|
|
| Author: | zook95 [ Tue Apr 12, 2011 12:50 am ] |
| Post subject: | Re: Vitara bull bar |
looks neat witht the chequer plate there and those mounts will be awsome |
|
| Author: | ealfa [ Tue Apr 12, 2011 12:55 am ] |
| Post subject: | Re: Vitara bull bar |
Here's a better view . Cheers |
|
| Author: | shakes [ Tue Apr 12, 2011 1:11 am ] |
| Post subject: | Re: Vitara bull bar |
bar looks neat 
|
|
| Author: | MacDaddy [ Tue Apr 12, 2011 6:58 am ] |
| Post subject: | Re: Vitara bull bar |
Jeez its hard to see what exactly you have done... to me it looks like one tube bar... i would want something more substantial than that... it doesnt really appeal to me... but if you like it, thats all that matters !
|
|
| Author: | ealfa [ Tue Apr 12, 2011 7:36 am ] |
| Post subject: | Re: Vitara bull bar |
Lol as I said Its just scrap I had laying around but I no wat ya meen it needs an extra tube up top . Which I will get around to do . But for now it's good |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|