auszookers.com • View topic

Board index » Talking About Stuff » I made it and fabrication

Vitara bull bar

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Mon Apr 11, 2011 9:14 am

Had some time on my hands and metal laying around so i slapped up a home job bar. Came up alright . Better than the stock good for nothing sheeet!!

Lights are still to go in and afue more features

89_tintop

az supporter

Joined: Fri Aug 07, 2009 11:30 pm
Posts: 3159
Location: gold coast

Posted: Mon Apr 11, 2011 9:17 am

pics???

_________________
http://auszookers.com/index.php?name=Forums&file=v

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Mon Apr 11, 2011 9:18 am

Before

After

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Mon Apr 11, 2011 9:21 am

Kinda just blends into the car havnt taken a great pic but ya get the jist! Any suggestions are welcome

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9347
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Mon Apr 11, 2011 11:43 am

So is it a bit of tube across the front and a skid plate?

_________________
mlm

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Mon Apr 11, 2011 11:56 am

Tube with bend up top
Straight tube down bottom then plate all the way down to control arms .
Prity simple

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9347
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Mon Apr 11, 2011 12:10 pm

I though that's what I could see. Looks good mate.
Pretty much what I'm looking at doing but with two tubes up the top cos I've gotta put indicators on mine.

_________________
mlm

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Mon Apr 11, 2011 12:19 pm

Yeh I'm adding that as well but it will be square so I can easily mount lights etc and it also will strengthen top bar. I welded on thicker plates where the bull bar mounts on chasis and tapped it so I could use 2 x 14mm diam bolts for extra strength on each side

zook95

az supporter

Joined: Mon Dec 13, 2010 7:07 am
Posts: 635
Location: wauchope NSW

Posted: Tue Apr 12, 2011 12:50 am

looks neat witht the chequer plate there and those mounts will be awsome

_________________
suzuki sj70+2 inch lift+ 2ich body lift+ el falcon

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Tue Apr 12, 2011 12:55 am

Here's a better view .

Cheers

shakes

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Posted: Tue Apr 12, 2011 1:11 am

bar looks neat

MacDaddy

az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Posted: Tue Apr 12, 2011 6:58 am

Jeez its hard to see what exactly you have done... to me it looks like one tube bar... i would want something more substantial than that... it doesnt really appeal to me... but if you like it, thats all that matters ! :wink:

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Tue Apr 12, 2011 7:36 am

Lol as I said Its just scrap I had laying around but I no wat ya meen it needs an extra tube up top . Which I will get around to do . But for now it's good

Page 1 of 1

[ 13 posts ]

Board index » Talking About Stuff » I made it and fabrication

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum