| auszookers.com https://www.auszookers.com/forum/ |
|
| sliders for my lwb https://www.auszookers.com/forum/viewtopic.php?f=14&t=20080 |
Page 1 of 1 |
| Author: | bazook [ Thu Mar 17, 2011 2:23 am ] |
| Post subject: | sliders for my lwb |
Here's some sliders for my lwb zook I'm doing so far I've done the brackets and bolted them on to day, so now I've got to get some 50x50 rhs and make my beams for my sliders to sit on, as I'm doing an exo (ladder rack) as well I'm going to have to make it strong for my "heavy ladders".. 
|
|
| Author: | hutch [ Thu Mar 17, 2011 5:13 am ] |
| Post subject: | Re: sliders for my lwb |
cool so far  , how thick is the plate?
|
|
| Author: | bazook [ Thu Mar 17, 2011 6:41 am ] |
| Post subject: | Re: hunting is fixed |
Its 6mm thick |
|
| Author: | bazook [ Sat Mar 19, 2011 11:26 am ] |
| Post subject: | Re: sliders for my lwb |
made some progress today so far my sliders are on and my exo is a 3rd of the way done 
as you can see the guy before me welded big mounts to the spring mount supports for his slides so they got the cut first 
|
|
| Author: | steak_knife [ Sat Mar 19, 2011 7:30 pm ] |
| Post subject: | Re: sliders for my lwb |
looking good, also look's like you have gas for the mig..
When you finished yours I may have a lil job for ya. 
|
|
| Author: | Teracis [ Sat Mar 19, 2011 8:54 pm ] |
| Post subject: | Re: sliders for my lwb |
That is looking the business! I plan to do something similar but without the front part of the ladder rack, I'd be moving that support back to just behind the door and following the B pillar. No actual idea when I'll start that yet though, much to do first! |
|
| Author: | bazook [ Sat Mar 19, 2011 10:59 pm ] |
| Post subject: | Re: sliders for my lwb |
im going to run the pillar one on top of the support from the chassis rail so it has support under it |
|
| Author: | steak_knife [ Sat Mar 19, 2011 11:01 pm ] |
| Post subject: | Re: sliders for my lwb |
bazook wrote: im going to run the pillar one on top of the support from the chassis rail so it has support under it
B pillar?? P.s, nice wheel's...
|
|
| Author: | bazook [ Sun Mar 20, 2011 7:09 am ] |
| Post subject: | Re: sliders for my lwb |
one side done and ready to prime and paint. The b pillar was going to be one piece but measure twice bend once ended up 100mm to small and wouldn't fit over the cab... 
My ladder and eyelet mount 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|