auszookers.com
https://www.auszookers.com/forum/

Custom snorkel - Finished Pics !!
https://www.auszookers.com/forum/viewtopic.php?f=14&t=19511		 Page 1 of 1
Author:  jungas [ Sat Feb 26, 2011 9:22 pm ]
Post subject:  Custom snorkel - Finished Pics !!
Fabbed up my snorkel today, just need to put the 90 degree rubber bend on the top and all done.
Author:  laurie [ Sat Feb 26, 2011 9:34 pm ]
Post subject:  Re: Custom snorkel
that looks cool. is it exhaust pipe?
how did you get the bend thru the guard?
i would love some close up pics to show the local exhaust joint.
Author:  jungas [ Sat Feb 26, 2011 10:05 pm ]
Post subject:  Re: Custom snorkel
Yea it's 2 1/2 inch exhaust pipe, i started with 1m of straight pipe and 2 90 degree mandrel bends then just cut and welded the different angles to get the bend...... took a few hours in all.

I'll grab some photos of the bend for you today sometime.
Author:  31zook [ Sat Feb 26, 2011 10:40 pm ]
Post subject:  Re: Custom snorkel
looks really good :D so simple, something ill add to my list :D
Author:  jungas [ Thu Mar 17, 2011 7:45 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
Hey guys just a few pics of the finished product.

Pretty happy with the way it's turned out, let me know what you think. :D
Author:  Rusho [ Thu Mar 17, 2011 7:49 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
Top job mate. Unsure about the bend at the top though. It is your snorkel not mine though, as long as you like it who gives a shit 8)
Author:  mr_ron [ Thu Mar 17, 2011 8:07 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
that look rather tidy :D.. How did you secure it to the pillar? also, i saw you dont have any hose clamps on the silicon joins?

Looks good tho mate :D

Ron
Author:  jungas [ Thu Mar 17, 2011 8:44 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
mr_ron wrote:
that look rather tidy :D.. How did you secure it to the pillar? also, i saw you dont have any hose clamps on the silicon joins?

Looks good tho mate :D

Ron


Yep keen eye..... yet to put the hose clamps on. As far as securing to the A pillar the snorkel has tabs welded on and it is screwed onto the pillar
Author:  joeblow [ Thu Mar 17, 2011 9:03 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
was about to say looks good but please don't point the inlet backwards......





then i saw the other pics........




:cry:
Author:  jungas [ Thu Mar 17, 2011 9:54 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
joeblow wrote:
was about to say looks good but please don't point the inlet backwards......





then i saw the other pics........




:cry:


What is wrong with the inlet backwards ?

I'm not 100% sure about the rubber bend at the top and it's the first time i've done it this way.... even if the rubber bend comes off the mandrel bend that will replace it will still point back.
Author:  zookyute1981 [ Thu Mar 17, 2011 12:21 pm ]
Post subject:  Re: Custom snorkel - Finished Pics !!
how much for the silicone bends?
Author:  jungas [ Fri Mar 18, 2011 3:53 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
All up about $70 for the bends.
Author:  zookyute1981 [ Fri Mar 18, 2011 2:35 pm ]
Post subject:  Re: Custom snorkel - Finished Pics !!
cheers for that just a bit more than that over here like $50 a bend
Author:  Scrawny [ Fri Mar 18, 2011 7:18 pm ]
Post subject:  Re: Custom snorkel - Finished Pics !!
joeblow wrote:
was about to say looks good but please don't point the inlet backwards......





then i saw the other pics........




:cry:


So you just come along, stick your little insult in with no explanation, then bugger off? :roll: :roll:
Author:  jungas [ Fri Mar 18, 2011 8:55 pm ]
Post subject:  Re: Custom snorkel - Finished Pics !!
zookyute1981 wrote:
cheers for that just a bit more than that over here like $50 a bend


Got mine from ebay and everything is shipped to your door...... they seem to be really good quality too. I checked supercheap and repco and they were all $50 each to.
Author:  JrZook [ Mon Mar 21, 2011 4:48 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
ScrawnC wrote:
joeblow wrote:
was about to say looks good but please don't point the inlet backwards......





then i saw the other pics........




:cry:


So you just come along, stick your little insult in with no explanation, then bugger off? :roll: :roll:


Its a VIC thing......... :crazy:
Author:  shakes [ Mon Mar 21, 2011 6:23 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
JrZook wrote:
ScrawnC wrote:
joeblow wrote:
was about to say looks good but please don't point the inlet backwards......





then i saw the other pics........




:cry:


So you just come along, stick your little insult in with no explanation, then bugger off? :roll: :roll:


Its a VIC thing......... :crazy:


Oi! don't put us all in the same basket... Just came to ask why not face it backwards?
Author:  mighty_vites [ Mon Mar 21, 2011 8:46 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
wasnt there a link on here about the yeah-nah's and the nah-yeah's on back to the forwards snorkles
Author:  shakes [ Wed Mar 23, 2011 1:12 am ]
Post subject:  Re: Custom snorkel - Finished Pics !!
mighty_vites wrote:
wasnt there a link on here about the yeah-nah's and the nah-yeah's on back to the forwards snorkles


http://auszookers.com/index.php?name=Fo ... ds+snorkel found it :helloo:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/