auszookers.com
https://www.auszookers.com/forum/

custom removeable hard top lid
https://www.auszookers.com/forum/viewtopic.php?f=14&t=15559		 Page 1 of 1
Author:  the_WIZARD [ Sat Oct 02, 2010 9:43 am ]
Post subject:  custom removeable hard top lid
Hi guys,
ive done some searching and couldnt find...
has anyone tried making a removable hardtop to suit a widetrack softtop using the roof of a hardtop?? i am keen to fabricate up a hardtop and dont know where to start as i couldnt find an aftermarket one and am on a budget toyed with the idea of playing with fibreglass and mould making but got put out by the idea of fucking it up and wasting all the supplies and money with little option to fix it unlike steel....

just an idea for now but am keen to give a try ??? any opinions?? has anyone built anything like this?? pics of existing removable hardtops and how they are fastened would be appreciated :) also what sorta cost would i be looking at paying for a hard top ready for scrapping?? or just the rear and roof cab section??
Author:  nandor85 [ Sat Oct 02, 2010 11:29 am ]
Post subject:  Re: custom removeable hard top lid
im making like a hard torneu cover for mine out of fiberglass ut something like full hard back will be abloody lot of work and money... u willl be better off waiting till 1 comes on sale

by the time u make the design then the mold then the final product its a fucking lot of work
Author:  the_WIZARD [ Sat Oct 02, 2010 9:20 pm ]
Post subject:  Re: custom removeable hard top lid
also thinking of getting lets say an old hilux canopy and cutting it down and fixing it back together, and getting new windows cut for it??

so desperate for a cheap alternative!!

thanks for the advice nandor i looked through your tornau build and its way complicated?? i think i shall have to save big dollars..... as all my mates have cruisers and hilux' and are planning a few touring trips, therefore me in my little zook thinks i need a new roof, (so does the girlfriend) so its in the cards along with a long range tank and snorkel!

its only till you start thinking of things to spend money on you realise how poor you actually are :P
Author:  shane1992 [ Thu Apr 28, 2011 1:19 am ]
Post subject:  Re: custom removeable hard top lid
Image

Dude who lives in my area got this custom alloy top made, its on hinges on th hoop and opens up like a boot of a car....
Author:  4wheeljive [ Thu Apr 28, 2011 2:03 am ]
Post subject:  Re: custom removeable hard top lid
That looks awesome I wonder what it weighs
Author:  shane1992 [ Thu Apr 28, 2011 5:30 am ]
Post subject:  Re: custom removeable hard top lid
Would weigh fuck all, probably less then a normal car boot
Author:  Teracis [ Thu Apr 28, 2011 6:22 am ]
Post subject:  Re: custom removeable hard top lid
As stated in the other thread this is posted in, it looks boss! Makes the Zook look like it should be in the Dakar!
Author:  vl2dy4 [ Thu Apr 28, 2011 10:55 am ]
Post subject:  Re: custom removeable hard top lid
shane1992 wrote:
Image

Dude who lives in my area got this custom alloy top made, its on hinges on th hoop and opens up like a boot of a car....


Hey can you find out how much it costed that looks friggin awesome i want one!!!

Conrad
Author:  abclarke [ Thu Apr 28, 2011 11:17 am ]
Post subject:  Re: custom removeable hard top lid
Would look better with a window or something on the back i reckon. Looks too plain imo.
Author:  skyman [ Thu Apr 28, 2011 10:00 pm ]
Post subject:  Re: custom removeable hard top lid
I want alook at how he finished of the front piece to the windshield yess!!
Author:  burls [ Fri Apr 29, 2011 9:03 am ]
Post subject:  Re: custom removeable hard top lid
I made a fibreglass over ply roof for the cab, turned out alright put marine carpet on the inside. No more flapping noises from the canopy and cost about a 100 bucks
Author:  dangerousdog [ Fri Apr 29, 2011 10:13 am ]
Post subject:  Re: custom removeable hard top lid
was thinking about how good it was to have a hard roof when i rolled and i had an idea. if you cut the top off a tintop (i no never chop a tintop) just the frunt about half way down the window and only as far back as youll need to get to the bow (of the soft top) then you could chop the bottem off the fold down window then weld it all together in a nice way (not the zook getto fab way) you could have a tintop that you can bolt on a soft top ??

anyone no what im getting at or is that just dribell
Author:  shane1992 [ Sat Apr 30, 2011 2:45 am ]
Post subject:  Re: custom removeable hard top lid
vl2dy4 wrote:
shane1992 wrote:
Image

Dude who lives in my area got this custom alloy top made, its on hinges on th hoop and opens up like a boot of a car....


Hey can you find out how much it costed that looks friggin awesome i want one!!!

Conrad


He got it made at Gk fab in Oak Flats Industrial road, Im not sure, ill try find out a price, I reckon other places will vary in price!
Author:  Samurai81 [ Thu May 05, 2011 10:01 pm ]
Post subject:  Re: custom removeable hard top lid
The latest NZ 4X4 Action mag features and article on how Suzuki NZ got Steve Whitton to remove the Indian ragtop and fab up a fibreglass roof and bulkhead. Not sure if they are available separately and there's a 15 week wait for a farm only Maruti. Hopefully the scan I made comes out.
Author:  5ierra [ Fri May 06, 2011 3:25 am ]
Post subject:  Re: custom removeable hard top lid
http://www.4wdfiberglass.com/cat_ai.php

$1000
Author:  skyman [ Fri May 06, 2011 7:43 am ]
Post subject:  Re: custom removeable hard top lid
Came out great thanks!
Author:  nandor85 [ Mon May 16, 2011 8:10 am ]
Post subject:  Re: custom removeable hard top lid
wouldnt takefuck all 2 make 1 of these im a sheet metal apprentice and would be easy as only place that would need welding is the rear rounded corners

but i do recon it woul look better painted black and would get rid of the massive glare u would get off it
Author:  matt.scorgie [ Mon May 16, 2011 9:09 am ]
Post subject:  Re: custom removeable hard top lid
paint the same colour as the car and have a small acrilic window in both sides and a bigger 1 in the rear and it will look awsome as top job mate
Author:  luke3411 [ Mon Aug 29, 2011 8:54 pm ]
Post subject:  Re: custom removeable hard top lid
Gotta ask, =How the heck are you meant to see? I'm looking at putting a canopy on my vitara cause the soft top has had it and I cant see out the side windows of the soft top. Makes it very difficult/dangerous when road driving cause I cant see whats beside me thats out of view of my side mirrors. Is this legal?
Author:  Polar_Bear [ Thu Sep 01, 2011 1:34 pm ]
Post subject:  Re: custom removeable hard top lid
nandor85 wrote:
but i do recon it woul look better painted black


Colorbond monument Armsup
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/