auszookers.com :: View topic - New rear bar...

auszookers.com https://www.auszookers.com/forum/

New rear bar... https://www.auszookers.com/forum/viewtopic.php?f=14&t=14623	Page 1 of 1

Author:	jonno_racing [ Sat Aug 28, 2010 7:55 am ]
Post subject:	New rear bar...
Ok well since i gave my rear bar some love i have been starting to work out what i wanted. also had a bonus.. after i had drawn up basicly what i wanted, i relised that i already owned a bar that looked nearly what i wanted and just needed some 9inch love and new mounts etc so some pics i started today and removed my old rear bar, wow not much holds them on! and started to take to the big girl.. i do inted on getting it powder coated once it is done 2. Started with.. removed and started on new bar. this side will be plated in etc but u get the point. i still need to remove old mounts, make new ones, recover points, haymon Reece hitch, fill in holes for ghey tail lights, find round tail lights that i like and make a mount somewhere for reversing light.

Author:	MrRocky [ Sat Aug 28, 2010 8:43 am ]
Post subject:	Re: New rear bar...
nice, i will be doing the same thing in the coming months. take lots of pics

Author:	jonno_racing [ Sat Aug 28, 2010 9:01 am ]
Post subject:	Re: New rear bar...
as always.. i will add the rear bar is actually a zook one lol..

Author:	jonno_racing [ Sun Aug 29, 2010 5:34 am ]
Post subject:	Re: New rear bar...
more done.. i need a mig! grr.. i might put in a order for some slim line numberplates to.. still a bit more chopping of body to be done 2.

Author:	Joe [ Sun Aug 29, 2010 5:37 am ]
Post subject:	Re: New rear bar...
Looks good matey, would look better if it sat closer to the bottom of the rear door

Author:	jonno_racing [ Sun Aug 29, 2010 5:51 am ]
Post subject:	Re: New rear bar...
yeah it will.. that was only just proped up so i could get a ruff idea of what it was going to look like and i like it! also did u add me to face book?

Author:	PJ.zook [ Mon Aug 30, 2010 8:03 am ]
Post subject:	Re: New rear bar...
Nice work, good to see you are giving it a go yourself.

Author:	jonno_racing [ Mon Aug 30, 2010 8:52 am ]
Post subject:	Re: New rear bar...
yeah PJ i have never been scared to make stuff! i built my front bar 2. and everything elce just a matter of ordering my tail lights atm and finish monts etc.

Author:	jonno_racing [ Sat Sep 04, 2010 5:13 am ]
Post subject:	Re: New rear bar...
this is the 500mm of 100x8mm flat bar (actualy 2.5mtrs off 100x10mm love buying stuff from my old work) had to grind a bit out and clean a bit up but fits up nice Removed some junk that is not needed any more, the points will be mounted with 2x10mm 8.8s with crush tube inbetween the chassis. Haymond reece mount in, needs to have center hole drilled, and shortened. i am going to try to keep the amount hanging out of the bar to a minimum might try get a bit more done tomorow but i am putting it off till i get my new mig!

Author:	jonno_racing [ Sun Sep 26, 2010 10:28 am ]
Post subject:	Re: New rear bar...
Ok updates on bar. i finished the mounts, cut out for the LED tail lights, and tacked it all up.. haymond reece recever is done 2 pics it has a pretty good look 2 it imo. it is currently at the welders place and should be done buy thrusday/friday

Author:	jonno_racing [ Wed Sep 29, 2010 7:48 am ]
Post subject:	Re: New rear bar...

Author:	needmorelift [ Wed Sep 29, 2010 12:24 pm ]
Post subject:	Re: New rear bar...
i want one

Author:	jonno_racing [ Wed Sep 29, 2010 12:50 pm ]
Post subject:	Re: New rear bar...
its pretty simple i have made all of this bar the pro welding with a $50 drill, some hole saws.. (good ones but meh) a 4 inch and a $50 stick welder!

Author:	jdk81 [ Wed Sep 29, 2010 12:55 pm ]
Post subject:	Re: New rear bar...
jonno_racing wrote: some hole saws.. a 4 inch you must really love it simple, effective and easy. It looks the goods, I dont want to be a negative nancy, so ill keep my mouth shut.

Author:	jonno_racing [ Wed Sep 29, 2010 12:59 pm ]
Post subject:	Re: New rear bar...
kind of untill u ask it to cut up and shape 10mm plate.

Author:	jonno_racing [ Thu Sep 30, 2010 11:08 am ]
Post subject:	Re: New rear bar...
well i can hapily say my rear bar is DONE! just need to fit her up and wire lights!

Author:	jonno_racing [ Thu Sep 30, 2010 11:09 am ]
Post subject:	Re: New rear bar...
jdk81 wrote: I dont want to be a negative nancy, so ill keep my mouth shut. Constructive critisam or piss take?

Author:	truongski [ Thu Sep 30, 2010 10:10 pm ]
Post subject:	Re: New rear bar...
What's the edge distance of the hole for the reese hitch bolt to end of SHS and what size is the hole? minimum edge distance should be 1.5x bolt hole.

Author:	steak_knife [ Thu Sep 30, 2010 10:12 pm ]
Post subject:	Re: New rear bar...
That does look good... Mount it up Jonno!!!!!!

Author:	bogfrog [ Fri Oct 01, 2010 8:58 am ]
Post subject:	Re: New rear bar...
steak_knife wrote: That does look good... Mount it up Jonno!!!!!! X2 it has come up very nice Jonno Good Work

Author:	jonno_racing [ Fri Oct 01, 2010 9:27 am ]
Post subject:	Re: New rear bar...
Thanks guys. i am happy with it 2! cant wait to get her out and test it out! i stole a few ideas off yours bog i liked it that much! truongski wrote: What's the edge distance of the hole for the reese hitch bolt to end of SHS and what size is the hole? minimum edge distance should be 1.5x bolt hole. 2 be honest mate i have no idea atm. i think the hole is 14 or 16mm and the gap is 25mm from memory! to be honest tho i would be much more concernd about it tareing the bar out of the chassis before the end out of the recever

Author:	fully sick coily [ Wed Feb 15, 2012 6:03 pm ]
Post subject:	Re: New rear bar...
was it verry hard to wire up new lights?

Author:	Gadzuks [ Thu Feb 16, 2012 3:08 pm ]
Post subject:	Re: New rear bar...
Mate, that's sweeet! Looks real nice. I like your cutting and shutting work, it gives it a very nice shape.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/