Done!
Nice job
| auszookers.com https://www.auszookers.com/forum/ |
|
| 1300 sump with 1600 baleno crank angle sensor https://www.auszookers.com/forum/viewtopic.php?f=14&t=13616 |
Page 1 of 1 |
| Author: | birko [ Sun Jul 18, 2010 12:26 am ] |
| Post subject: | 1300 sump with 1600 baleno crank angle sensor |
Hey, Just thought id put up some pics of my solution (thanks fatzook) to fitting the crank angle sensor needed in the 1300 sump for my conversion. Also some pics of the modified 1300 pickup with a 1600 end on it and modified bracket. 1600 swap |
|
| Author: | Fatzook [ Sun Jul 18, 2010 1:01 am ] |
| Post subject: | Re: 1300 sump with 1600 baleno crank angle sensor |
Done! Nice job
|
|
| Author: | Joe [ Sun Jul 18, 2010 7:28 am ] |
| Post subject: | Re: 1300 sump with 1600 baleno crank angle sensor |
|
|
| Author: | PJ.zook [ Sun Jul 18, 2010 9:47 am ] |
| Post subject: | Re: 1300 sump with 1600 baleno crank angle sensor |
Thats exactly how i did it, good work! |
|
| Author: | xedent [ Sun Sep 26, 2010 6:02 am ] |
| Post subject: | Re: 1300 sump with 1600 baleno crank angle sensor |
Hey mate what did you weld the sump together with ? Tig or mig ? cheers. |
|
| Author: | PJ.zook [ Sun Sep 26, 2010 8:51 am ] |
| Post subject: | Re: 1300 sump with 1600 baleno crank angle sensor |
I used a mig, then poured diesel inside the sump till it was about to brim over, and left it for a day, no leaks or signs of weeping, is good. |
|
| Author: | birko [ Sun Sep 26, 2010 9:13 am ] |
| Post subject: | Re: 1300 sump with 1600 baleno crank angle sensor |
yep mig also |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|