Posted by jimbo_jones on Saturday, April 23, 2011
I did a step by step on how to mod your 1.3 carbi hat to suit the 2" body lift
first remove the carbi hat
you will need a piece out of a vs commodore air box see pic remove the piece using a allen key be careful not to rip the gasket as you will need this
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/6659f9e8.jpg[/img]
hold the piece over the carbi hat, mark & drill holes
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/df2b5c23.jpg[/img]
place gasket over carbi hat and using original allen key bolts and some 8mm nuts bolt unit together
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/f5a32819.jpg[/img]
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/666189a8.jpg[/img]
you will end up with something like this
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/3f1e99b0.jpg[/img]
then remove the stud on top of the carbi
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/4f15dc79.jpg[/img]
you will need a long bolt like this
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/ddc3709a.jpg[/img]
bolt it on the carbi
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/24d1021d.jpg[/img]
and connect the air box
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/0bfb3a96.jpg[/img]
then your all done
[img]http://i64.photobucket.com/albums/h169/jimbo-jones/703c37a0.jpg[/img]
